No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - Virtualization

AR500, AR510, AR531, AR550, AR1500, and AR2500 V200R009

This document provides the basic concepts, configuration procedures, and configuration examples in different application scenarios of the virtualization feature supported by the device.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
A Newly Mounted Disk Cannot Be Properly Mounted and Used in a VM After the reboot Command Is Run or the Device Is Powered Off Unexpectedly

A Newly Mounted Disk Cannot Be Properly Mounted and Used in a VM After the reboot Command Is Run or the Device Is Powered Off Unexpectedly

Fault Description

The attach disk disk_name command is run to allocate the second disk to a VM, and the disk is formatted and mounted in the VM. After the disk is mounted for a short time, the VM is stopped unexpectedly. For example, the VM is restarted using the reboot command or the device is powered off unexpectedly. As a result, the newly mounted disk cannot be properly mounted and used in the VM.

Troubleshooting Procedure

  1. Stop the VM. For details, see Stopping a VM.

  2. Deactivate the VM. For details, see Deactivating a VM.

  3. Run the undo attach disk disk_name command in the VM view to uninstall the disk in the VM.

  4. Run the undo blank-disk name disk_name command in the virtual-environment view to delete the disk.

  5. Run the blank-disk name disk_name command in the virtual-environment view to create a disk.

  6. Run the attach disk disk_name command in the VM view to add the disk to the VM.

Translation
Download
Updated: 2019-05-06

Document ID: EDOC1000177806

Views: 8961

Downloads: 38

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next