No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - Virtualization

AR500, AR510, AR531, AR550, AR1500, and AR2500 V200R009

This document provides the basic concepts, configuration procedures, and configuration examples in different application scenarios of the virtualization feature supported by the device.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the Virtualization Configuration

Verifying the Virtualization Configuration

Procedure

  • Run the display download-ratio package package-name command in the virtual-environment view to check the download progress of a file.
  • Run the display blank-disk name command in the virtual-environment view to check blank disk information.
  • Run the display resource-usage command in the VM view to check resource usage of a VM.
  • Run the display virtual-environment resource { all | type type } command in the virtual-environment view to check resources in the virtual environment.
  • Run the display vm { all | vm-name } command in the virtual-environment view to check VM information.
  • Run the display veth information command in the virtual-environment view to check virtual interfaces on the HostOS.
  • Run the display virtual-environment link command in the virtual-environment view to check virtual link information.
  • Run the display ovs bridge information command in the virtual-environment view to check the vSwitch configuration.
  • Run the display ovs mac-address bridge bridge-name command in the virtual-environment view to check the MAC address of a vSwitch.
Translation
Download
Updated: 2019-05-06

Document ID: EDOC1000177806

Views: 8908

Downloads: 38

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next