No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S600-E V200R011C10 Configuration Guide - IP Unicast Routing

This document describes IP Unicast Routing configurations supported by the switch, including the principle and configuration procedures of IP Routing Overview, Static Route, RIP, RIPng, OSPF, Routing Policy ,and PBR, and provides configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Controlling the Valid Time of Routing Policies

Controlling the Valid Time of Routing Policies

Pre-configuration Tasks

None

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run route-policy-change notify-delay delay-time

    The delay in applying the routing policy is set.

    The value ranges from 1 to 180, in seconds.

    By default, the RM immediately instructs protocols to apply a new policy when the existing routing policy changes.

  3. Run quit

    Return to the user view.

Verifying the Configuration

  • Run the display current-configuration | include notify-delay command to check the delay in applying a routing policy.

Translation
Download
Updated: 2019-03-30

Document ID: EDOC1000178018

Views: 125209

Downloads: 17

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next