No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S600-E V200R011C10 Configuration Guide - Network Management and Monitoring

This document provides the configurations of network management and monitoring features supported by the product, including SNMP, RMON, LLDP, NQA, Service Diagnosis, Mirroring, Packet Capture, and sFlow.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Example for Configuring a Path Jitter Test

Example for Configuring a Path Jitter Test

Networking Requirements

As shown in Figure 4-26, SwitchA functions as an NQA client to test the jitter on the network between SwitchA and SwitchC.

Figure 4-26  Networking diagram for configuring the path jitter test

Configuration Roadmap

The configuration roadmap is as follows:

  1. Configure SwitchA as an NQA client and configure a path jitter test instance on SwitchA.

  2. Configure SwitchC as an NQA server.

Procedure

  1. Configure an IP address for each interface and ensure reachable routes between switches.

    # Configure SwitchA.

    <HUAWEI> system-view
    [HUAWEI] sysname SwitchA
    [SwitchA] vlan 100
    [SwitchA-vlan100] quit
    [SwitchA] interface gigabitethernet 0/0/1
    [SwitchA-GigabitEthernet0/0/1] port link-type hybrid
    [SwitchA-GigabitEthernet0/0/1] port hybrid pvid vlan 100
    [SwitchA-GigabitEthernet0/0/1] port hybrid untagged vlan 100
    [SwitchA-GigabitEthernet0/0/1] quit
    [SwitchA] interface vlanif 100
    [SwitchA-Vlanif100] ip address 10.1.1.1 24
    [SwitchA-Vlanif100] quit
    [SwitchA] ip route-static 10.2.1.0 255.255.255.0 10.1.1.2

    # Configure SwitchB.

    <HUAWEI> system-view
    [HUAWEI] sysname SwitchB
    [SwitchB] vlan 100
    [SwitchB-vlan100] quit
    [SwitchB] vlan 110
    [SwitchB-vlan110] quit
    [SwitchB] interface gigabitethernet 0/0/1
    [SwitchB-GigabitEthernet0/0/1] port link-type hybrid
    [SwitchB-GigabitEthernet0/0/1] port hybrid pvid vlan 100
    [SwitchB-GigabitEthernet0/0/1] port hybrid untagged vlan 100
    [SwitchB-GigabitEthernet0/0/1] quit
    [SwitchB] interface vlanif 100
    [SwitchB-Vlanif100] ip address 10.1.1.2 24
    [SwitchB-Vlanif100] quit
    [SwitchB] interface gigabitethernet 0/0/2
    [SwitchB-GigabitEthernet0/0/2] port link-type hybrid
    [SwitchB-GigabitEthernet0/0/2] port hybrid pvid vlan 110
    [SwitchB-GigabitEthernet0/0/2] port hybrid untagged vlan 110
    [SwitchB-GigabitEthernet0/0/2] quit
    [SwitchB] interface vlanif 110
    [SwitchB-Vlanif110] ip address 10.2.1.1 24
    [SwitchB-Vlanif110] quit
    

    # Configure SwitchC.

    <HUAWEI> system-view
    [HUAWEI] sysname SwitchC
    [SwitchC] vlan 110
    [SwitchC-vlan110] quit
    [SwitchC] interface gigabitethernet 0/0/1
    [SwitchC-GigabitEthernet0/0/1] port link-type hybrid
    [SwitchC-GigabitEthernet0/0/1] port hybrid pvid vlan 110
    [SwitchC-GigabitEthernet0/0/1] port hybrid untagged vlan 110
    [SwitchC-GigabitEthernet0/0/1] quit
    [SwitchC] interface vlanif 110
    [SwitchC-Vlanif110] ip address 10.2.1.2 24
    [SwitchC-Vlanif110] quit
    [SwitchC] ip route-static 10.1.1.0 255.255.255.0 10.2.1.1

  2. Configure SwitchA.

    # Enable the NQA client and create a path jitter test instance.

    [SwitchA] nqa test-instance admin pathjitter
    [SwitchA-nqa-admin-pathjitter] test-type pathjitter
    [SwitchA-nqa-admin-pathjitter] destination-address ipv4 10.2.1.2

  3. Start the test instance.

    [SwitchA-nqa-admin-pathjitter] start now

  4. Verify the test result.

    # View the test result.

    [SwitchA-nqa-admin-pathjitter] display nqa results test-instance admin pathjitter
                                                                                                                                        
     NQA entry(admin, pathjitter) :testflag is inactive ,testtype is pathjitter                                                         
       Current Status:CLOSE                                                                                                             
      1 . Test 1 result   The test is finished                                                                                          
       Trace Completion Status:success                                                                                                  
       1 . Hop 1                                                                                                                        
       Destination ip address:10.1.1.2                                                                                                  
       Jitter Completion Status:success     Jitter Finish Status:finished                                                               
       SendProbe:60                         ResponseProbe:60                                                                            
       Min/Max/Avg/Sum RTT:1/4/2/128        RTT Square Sum:286                                                                          
       NumOfRTT:60                          Drop operation number:0                                                                     
       Operation sequence errors number:0   RTT Stats errors number:0                                                                   
       System busy operation number:0       Operation timeout number:0                                                                  
       Min Positive SD:1                    Min Positive DS:1                                                                           
       Max Positive SD:2                    Max Positive DS:2                                                                           
       Positive SD Number:17                Positive DS Number:15                                                                       
       Positive SD Sum:18                   Positive DS Sum:16                                                                          
       Positive SD Square Sum:20            Positive DS Square Sum:18                                                                   
       Min Negative SD:1                    Min Negative DS:1                                                                           
       Max Negative SD:1                    Max Negative DS:1                                                                           
       Negative SD Number:17                Negative DS Number:17                                                                       
       Negative SD Sum:17                   Negative DS Sum:17                                                                          
       Negative SD Square Sum:17            Negative DS Square Sum:17                                                                   
       Max Delay SD:2                       Max Delay DS:1                                                                              
       Average of Jitter:1                  NumberOfOWD:60                                                                              
       Average of Jitter SD:1               Average of Jitter DS:1                                                                      
       Jitter out value:0.4592443           Jitter in value:0.4454907                                                                   
       OWD SD Sum:61                        OWD DS Sum:7                                                                                
       Packet Loss Ratio:0%                 Packet Loss Count:0                                                                         
       2 . Hop 2                                                                                                                        
       Destination ip address:10.2.1.2                                                                                                  
       Jitter Completion Status:success     Jitter Finish Status:finished                                                               
       SendProbe:60                         ResponseProbe:60                                                                            
       Min/Max/Avg/Sum RTT:2/89/9/518       RTT Square Sum:19734                                                                        
       NumOfRTT:60                          Drop operation number:0                                                                     
       Operation sequence errors number:0   RTT Stats errors number:0                                                                   
       System busy operation number:0       Operation timeout number:0                                                                  
       Min Positive SD:1                    Min Positive DS:1                                                                           
       Max Positive SD:84                   Max Positive DS:2                                                                           
       Positive SD Number:11                Positive DS Number:3                                                                        
       Positive SD Sum:161                  Positive DS Sum:5                                                                           
       Positive SD Square Sum:8821          Positive DS Square Sum:9                                                                    
       Min Negative SD:1                    Min Negative DS:1                                                                           
       Max Negative SD:22                   Max Negative DS:1                                                                           
       Negative SD Number:13                Negative DS Number:3                                                                        
       Negative SD Sum:137                  Negative DS Sum:3                                                                           
       Negative SD Square Sum:2347          Negative DS Square Sum:3                                                                    
       Max Delay SD:44                      Max Delay DS:44                                                                             
       Average of Jitter:10                 NumberOfOWD:60                                                                              
       Average of Jitter SD:12              Average of Jitter DS:1                                                                      
       Jitter out value:2.8217764           Jitter in value:0.0976862                                                                   
       OWD SD Sum:234                       OWD DS Sum:224                                                                              
       Packet Loss Ratio:0%                 Packet Loss Count:0    

Configuration Files

  • SwitchA configuration file

    #
    sysname SwitchA
    #
    vlan batch 100
    #
    interface Vlanif100
     ip address 10.1.1.1 255.255.255.0
    #
    interface GigabitEthernet0/0/1
     port link-type hybrid
     port hybrid pvid vlan 100
     port hybrid untagged vlan 100
    #
    ip route-static 10.2.1.0 255.255.255.0 10.1.1.2
    #
    nqa test-instance admin pathjitter
     test-type pathjitter
     destination-address ipv4 10.2.1.2
    #
    return
  • SwitchB configuration file

    #
    sysname SwitchB
    #
    vlan batch 100 110
    #
    interface Vlanif100
     ip address 10.1.1.2 255.255.255.0
    #
    interface Vlanif110
     ip address 10.2.1.1 255.255.255.0
    #
    interface GigabitEthernet0/0/1
     port link-type hybrid
     port hybrid pvid vlan 100
     port hybrid untagged vlan 100
    #
    interface GigabitEthernet0/0/2
     port link-type hybrid
     port hybrid pvid vlan 110
     port hybrid untagged vlan 110
    #
    return
  • SwitchC configuration file

    #
    sysname SwitchC
    #
    vlan batch 110
    #
    interface Vlanif110
     ip address 10.2.1.2 255.255.255.0
    #
    interface GigabitEthernet0/0/1
     port link-type hybrid
     port hybrid pvid vlan 110
     port hybrid untagged vlan 110
    #
    ip route-static 10.1.1.0 255.255.255.0 10.2.1.1
    #
    return
Translation
Download
Updated: 2019-03-30

Document ID: EDOC1000178020

Views: 62312

Downloads: 7

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next