No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S600-E V200R011C10 Configuration Guide - Network Management and Monitoring

This document provides the configurations of network management and monitoring features supported by the product, including SNMP, RMON, LLDP, NQA, Service Diagnosis, Mirroring, Packet Capture, and sFlow.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
TCP Test

TCP Test

The NQA TCP test measures the time taken to set up a TCP connection between an NQA client and a TCP server through the three-way handshake.

The TCP test process is as follows:

  1. The source (SwitchA) sends a TCP SYN packet to the destination (SwitchB) to set up a TCP connection.

  2. The destination receives the TCP SYN packet and responds with a TCP SYN-ACK packet.

  3. The source receives the SYN-ACK packet and sends an ACK packet to the destination. The connection is now established and the source can calculate the time taken.

Figure 4-7  TCP test scenario

Frequent TCP tests can consume too many resources and affect device performance.

TCP test results and historical records are collected in test instances. You can run commands to view the test results and historical records.

Updated: 2019-03-30

Document ID: EDOC1000178020

Views: 63774

Downloads: 7

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next