No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S600-E V200R011C10 Configuration Guide - Network Management and Monitoring

This document provides the configurations of network management and monitoring features supported by the product, including SNMP, RMON, LLDP, NQA, Service Diagnosis, Mirroring, Packet Capture, and sFlow.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Traffic Mirroring

Traffic Mirroring

In traffic mirroring, service traffic that matches configured rules is copied and then sent to observing ports for analysis and monitoring.

Figure 6-4 shows the process of traffic mirroring. The mirrored port copies service flow 2 that matches the rules to the observing port, which then forwards the copied service flow 2 to the monitoring device.

Figure 6-4  Traffic mirroring

A traffic policy containing a traffic mirroring behavior can be applied globally, in a VLAN, or on a mirrored port. For details about traffic policies, see WMQC Configuration and ACL-based Simplified Traffic Policy Configuration in the S600-E V200R011C10 Configuration Guide - QoS.

Translation
Download
Updated: 2019-03-30

Document ID: EDOC1000178020

Views: 57076

Downloads: 7

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next