No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S600-E V200R011C10 Configuration Guide - Network Management and Monitoring

This document provides the configurations of network management and monitoring features supported by the product, including SNMP, RMON, LLDP, NQA, Service Diagnosis, Mirroring, Packet Capture, and sFlow.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Enabling the SNMP Extended Error Code Function

(Optional) Enabling the SNMP Extended Error Code Function

Context

If both the NMS and managed device are Huawei products, enabling this function extends error codes and defines more scenarios. This enables users to locate and troubleshoot faults quickly and accurately.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run snmp-agent extend error-code enable

    The extended error code function is enabled.

    By default, SNMP sends only standard error codes. More error codes will be sent to the NMS after the extended error code function is enabled.

Translation
Download
Updated: 2019-10-18

Document ID: EDOC1000178020

Views: 74746

Downloads: 10

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next