No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S600-E V200R011C10 Configuration Guide - Network Management and Monitoring

This document provides the configurations of network management and monitoring features supported by the product, including SNMP, RMON, LLDP, NQA, Service Diagnosis, Mirroring, Packet Capture, and sFlow.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring an NQA Test Instance

Configuring an NQA Test Instance

You can configure an NQA test instance to perform an NQA test of a specified type.

Pre-configuration Tasks

Before configuring the NQA test instance, complete the following tasks:

  • Ensure that the device is running properly.
  • Configure routing to ensure reachable routes between devices involved in the test.
NOTE:

The pre-configuration tasks differ from different test instances. For details, see the configuration of each test instance.

Configuration Procedure

The following optional test instances are independent of each other:

Translation
Download
Updated: 2019-03-30

Document ID: EDOC1000178020

Views: 62715

Downloads: 7

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next