No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S600-E V200R011C10 Configuration Guide - Network Management and Monitoring

This document provides the configurations of network management and monitoring features supported by the product, including SNMP, RMON, LLDP, NQA, Service Diagnosis, Mirroring, Packet Capture, and sFlow.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring the NQA Client to Send Traps When a Probe Fails

Configuring the NQA Client to Send Traps When a Probe Fails

Context

NOTE:

Path jitter test does not support the traps for probe failures.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run nqa test-instance admin-name test-name

    The NQA view is displayed.

  3. Run send-trap probefailure

    The NQA client is configured to send traps when a probe fails.

    By default, the NQA client sends no trap when a probe fails.

  4. Run probe-failtimes times

    The threshold on the traps sent after the probe fails is configured. The threshold specifies maximum number of continuous probe failures for the NQA test instance.

    By default, a trap is sent for each probe failure.

Translation
Download
Updated: 2019-03-30

Document ID: EDOC1000178020

Views: 63920

Downloads: 7

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next