No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S600-E V200R011C10 Configuration Guide - Network Management and Monitoring

This document provides the configurations of network management and monitoring features supported by the product, including SNMP, RMON, LLDP, NQA, Service Diagnosis, Mirroring, Packet Capture, and sFlow.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Enabling the LLDP Trap Function

Enabling the LLDP Trap Function

Context

The LLDP trap function allows a device to send traps to the NMS in one of the following cases:
  • The LLDP function is enabled or disabled globally.
  • The local management address changes.
  • The rate of LLDPDUs received by an interface exceeds the alarm threshold.
  • A neighbor is added, deleted, aged out, or packets from the neighbor are discarded.
NOTE:
  • The LLDP trap function applies to all interfaces. The LLDP trap function takes effect regardless whether LLDP is enabled globally.
  • If the network topology is unstable, disable the LLDP trap function to prevent frequent trap sending.
  • To set the interval for sending neighbor change traps to the NMS, run the lldp trap-interval commands. If neighbor information changes frequently, extend the interval to reduce the number of traps, thus suppressing network topology flapping.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run snmp-agent trap enable feature-name lldptrap [ trap-name { hwlldpdisabled | hwlldpenabled | hwlldplocmanipaddrchange | hwlldprateexcessive | lldpremtableschange } ]

    The LLDP trap function is enabled.

    By default, the LLDP trap function is enabled.

Translation
Download
Updated: 2019-09-23

Document ID: EDOC1000178020

Views: 73784

Downloads: 8

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next