No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S600-E V200R011C10 Configuration Guide - Network Management and Monitoring

This document provides the configurations of network management and monitoring features supported by the product, including SNMP, RMON, LLDP, NQA, Service Diagnosis, Mirroring, Packet Capture, and sFlow.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
A Drop Record Exists in the UDP Jitter Test Result

A Drop Record Exists in the UDP Jitter Test Result

Context

If the UDP jitter test result has drop records, the value of the Drop operation number field in the display nqa results command output is not 0. This fault is commonly caused by one of the following:
  • The destination IP address does not exist or the route to the network segment to which the destination IP address belongs does not exist in the routing table.
  • The source IP address is incorrect.

Procedure

  1. Run the display ip routing-table command on the NQA client to check whether the unicast route along the test path exists.

    • If the route exists, run the ping command to check whether devices can successfully ping each other.
    • If the route does not exist, run the corresponding command to reconfigure the route.

  2. Run the display nqa-agent admin-name test-name [ verbose ] command on the NQA client or run the display this command in the NQA test instance view to check whether the source IP address is configured.
Translation
Download
Updated: 2019-03-30

Document ID: EDOC1000178020

Views: 57161

Downloads: 7

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next