No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S600-E V200R011C10 Configuration Guide - Network Management and Monitoring

This document provides the configurations of network management and monitoring features supported by the product, including SNMP, RMON, LLDP, NQA, Service Diagnosis, Mirroring, Packet Capture, and sFlow.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
VLAN Mirroring

VLAN Mirroring

In VLAN mirroring, packets on all the active ports in a specified VLAN are copied and then sent to observing ports. You can monitor packets in a single VLAN or multiple VLANs.

Currently, when VLAN mirroring is used on the Huawei S series fixed switches, only the packets that are received by the active ports in a VLAN can be copied to an observing port, as shown in Figure 6-5.

Figure 6-5  VLAN mirroring

There are two types of VLAN mirroring: local VLAN mirroring and remote VLAN mirroring. The type used depends on the location of monitoring devices. In remote VLAN mirroring, hosts cannot reside on the VLAN of the intermediate Layer 2 network through which mirrored packets are forwarded from an observing port to a monitoring device.

Updated: 2019-10-18

Document ID: EDOC1000178020

Views: 74115

Downloads: 9

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next