No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S600-E V200R011C10 Configuration Guide - Network Management and Monitoring

This document provides the configurations of network management and monitoring features supported by the product, including SNMP, RMON, LLDP, NQA, Service Diagnosis, Mirroring, Packet Capture, and sFlow.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring an FTP Download Test Instance

Configuring an FTP Download Test Instance

Context

Before configuring an FTP download test instance, configure the FTP user name, password, and the login directory for the FTP server, and ensure reachable routes between the FTP client and the FTP server.

Pay attention to the following points for an FTP download test:

  • The local device functions as an FTP client to download the specified file from the FTP server.
  • An FTP download test can obtain statistics about each FTP phase, including the time spent in setting up an FTP control connection and the time spent in transmitting data.
NOTE:

The NQA client also functions as the FTP client. Perform the following steps on the NQA client.

At present, the NQA FTP test only supports data transmission in proactive and ASCII modes. Anonymous users cannot be used for the test.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run nqa test-instance admin-name test-name

    An NQA test instance is created, and the NQA view is displayed.

  3. Run test-type ftp

    The test type is set to FTP.

  4. Run destination-address ipv4 ipv4-address

    The destination address is configured.

  5. (Optional) Run the following commands as required to configure parameters for the FTP test.

    • Run description string

      A description is configured for the test instance.

    • Run frequency interval

      The test period is set for the NQA test instance.

    • Run timeout time

      The timeout period of a probe is set for the NQA test instance.

      By default, the timeout period of an FTP probe is 15 seconds.

    • Run destination-port port-number

      The destination port number is configured.

    • Run source-address ipv4 ipv4-address

      The source IP address is configured.

    • Run source-port port-number

      The source port number is configured.

    • Run ttl number

      The TTL value in the NQA test packet is set.

    • Run sendpacket passroute

      The NQA test instance is configured to send packets without searching the routing table.

    • Run tos value

      Type of Service (TOS) is set for the test packet.

    • Run ftp-filesize size

      The file size is set for the FTP test instance.

    • Run vpn-instance vpn-instance-name

      The VPN instance name is configured.

    • Run records history number

      The maximum number of historical records is set for the NQA test instance.

    • Run records result number

      The maximum number of result records is set for the NQA test instance.

    • Run agetime hh:mm:ss

      The aging time is set for the NQA test instance.

  6. Run ftp-operation get

    The FTP operation type is set to Get.

  7. Run ftp-username name

    The FTP user name is configured.

  8. Run ftp-password { password | cipher cipher-password }

    The FTP password is configured.

  9. Run ftp-filename file-name

    The file name and file path are configured for the FTP test instance.

    NOTE:

    During the FTP test, select a file of a small size. If the file is too large, the test may fail because of timeout.

    The file download operation cannot save the file to the local file system, but only count the time taken to download the file. The system releases the memory immediately after obtaining the data.

Translation
Download
Updated: 2019-03-30

Document ID: EDOC1000178020

Views: 63881

Downloads: 7

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next