Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuration of Traffic Policing, Traffic Shaping, and Interface-based Rate Limiting Configuration
This chapter describes how to configure traffic policing, traffic shaping, and interface-based rate limiting.
- Overview of Traffic Policing, Traffic Shaping, and Interface-based Rate Limiting
- Understanding Traffic Policing, Traffic Shaping, and Interface-based
Rate Limiting
- Application Scenarios for Traffic Policing, Traffic Shaping, and Interface-based Rate Limiting
- Licensing Requirements and Limitations for Traffic Policing,
Traffic Shaping, and Interface-based Rate Limiting
- Default Settings for Traffic Policing, Traffic Shaping, and
Interface-based Rate Limiting
- Configuring Traffic Policing
- Configuring Traffic Shaping
- Configuring Interface-based Rate Limiting
- Maintaining Traffic Policing, Traffic Shaping, and Interface-based
Rate Limiting
- Configuration Examples for Traffic Policing, Traffic Shaping,
and Interface-based Rate Limiting
- FAQ About Traffic Policing, Traffic Shaping, and Interface-based
Rate Limiting
