Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Overview of Redirection
Modular QoS Command-Line Interface (MQC) can be used to implement redirection.
Redirection is the process of redirecting packets that match traffic classification rules to a different destination.
The device supports the following redirection functions:
- Redirection to an interface: redirects packets to a specified interface by which packets need to be processed or through which packets are sent to a specified device.
- Redirection to a next hop address: redirects packets to a next hop address when the received packets need to be processed by a downstream device. This function is valid for only Layer 3 packets and can be used to implement PBR. For details about PBR, see PBR Configuration in the S600-E V200R011C10 Configuration Guide - IP Unicast Routing.
