Enter keywords to search.
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring ACL-based Re-marking
Configuring ACL-based Re-marking
Context
ACL-based re-marking allows the device to re-mark packets
matching an ACL, for example, 802.1p priority, DSCP service type, local IP precedence,
IP precedence, and VLAN ID.
Procedure
Configuring ACL-based re-marking globally or in a VLAN
Run system-view
The system view is displayed.
Run the following commands as required.
Run traffic-remark vlan vlan-id inbound acl ipv6 bas-acl adv-acl name acl-name l2-acl user-acl rule rule-id 8021p 8021p-value | dscp { dscp-name | dscp-value } | ip-precedence ip-precedence-value | local-precedence local-precedence-value | vlan-id vlan-id }
The device is configured to re-mark
incoming packets matching an ACL.
Run traffic-remark vlan vlan-id outbound acl ipv6 bas-acl adv-acl name acl-name l2-acl rule rule-id 8021p 8021p-value | dscp { dscp-name | dscp-value } | vlan-id vlan-id }
The device is configured
to re-mark outgoing packets matching an ACL.
Run traffic-remark vlan vlan-id inbound acl l2-acl rule rule-id acl bas-acl adv-acl name acl-name rule rule-id 8021p 8021p-value dscp dscp-name dscp-value ip-precedence ip-precedence-value | local-precedence local-precedence-value vlan-id vlan-id
The device is configured to re-mark incoming packets matching
Layer 2 and Layer 3 ACLs.
Run traffic-remark vlan vlan-id inbound acl bas-acl adv-acl rule rule-id acl l2-acl name acl-name rule rule-id 8021p 8021p-value dscp dscp-name dscp-value ip-precedence ip-precedence-value | local-precedence local-precedence-value vlan-id vlan-id
The device is configured to re-mark incoming packets matching
Layer 2 and Layer 3 ACLs.
Run traffic-remark vlan vlan-id inbound acl name acl-name rule rule-id acl bas-acl adv-acl l2-acl name acl-name rule rule-id 8021p 8021p-value dscp dscp-name dscp-value ip-precedence ip-precedence-value | local-precedence local-precedence-value vlan-id vlan-id
The device is configured to re-mark incoming packets matching
Layer 2 and Layer 3 ACLs.
Run traffic-remark vlan vlan-id outbound acl l2-acl rule rule-id acl bas-acl adv-acl name acl-name rule rule-id 8021p 8021p-value dscp dscp-name dscp-value vlan-id vlan-id
The
device is configured to re-mark outgoing packets matching Layer 2
and Layer 3 ACLs.
Run traffic-remark vlan vlan-id outbound acl bas-acl adv-acl rule rule-id acl l2-acl name acl-name rule rule-id 8021p 8021p-value dscp dscp-name dscp-value vlan-id vlan-id
The
device is configured to re-mark outgoing packets matching Layer 2
and Layer 3 ACLs.
Run traffic-remark vlan vlan-id outbound acl name acl-name rule rule-id acl bas-acl adv-acl l2-acl name acl-name rule rule-id 8021p 8021p-value dscp dscp-name dscp-value vlan-id vlan-id
The
device is configured to re-mark outgoing packets matching Layer 2
and Layer 3 ACLs.
Configuring ACL-based re-marking on an interface
Run system-view
The system view is displayed.
Run interface interface-type interface-number
The interface view is displayed.
Run the following commands as required.
Run traffic-remark inbound acl ipv6 bas-acl adv-acl name acl-name l2-acl user-acl rule rule-id 8021p 8021p-value | dscp { dscp-name | dscp-value } | ip-precedence ip-precedence-value | local-precedence local-precedence-value | vlan-id vlan-id }
The device is configured to re-mark
incoming packets matching an ACL.
Run traffic-remark outbound acl ipv6 bas-acl adv-acl name acl-name l2-acl rule rule-id 8021p 8021p-value | dscp { dscp-name | dscp-value } | vlan-id vlan-id }
The device is configured
to re-mark outgoing packets matching an ACL.
Run traffic-remark inbound acl l2-acl rule rule-id acl bas-acl adv-acl name acl-name rule rule-id 8021p 8021p-value dscp dscp-name dscp-value ip-precedence ip-precedence-value | local-precedence local-precedence-value vlan-id vlan-id
The device is configured to re-mark incoming packets matching
Layer 2 and Layer 3 ACLs.
Run traffic-remark inbound acl bas-acl adv-acl rule rule-id acl l2-acl name acl-name rule rule-id 8021p 8021p-value dscp dscp-name dscp-value ip-precedence ip-precedence-value | local-precedence local-precedence-value vlan-id vlan-id
The device is configured to re-mark incoming packets matching
Layer 2 and Layer 3 ACLs.
Run traffic-remark inbound acl name acl-name rule rule-id acl bas-acl adv-acl l2-acl name acl-name rule rule-id 8021p 8021p-value dscp dscp-name dscp-value ip-precedence ip-precedence-value | local-precedence local-precedence-value vlan-id vlan-id
The device is configured to re-mark incoming packets matching
Layer 2 and Layer 3 ACLs.
Run traffic-remark outbound acl l2-acl rule rule-id acl bas-acl adv-acl name acl-name rule rule-id 8021p 8021p-value dscp dscp-name dscp-value vlan-id vlan-id
The
device is configured to re-mark outgoing packets matching Layer 2
and Layer 3 ACLs.
Run traffic-remark outbound acl bas-acl adv-acl rule rule-id acl l2-acl name acl-name rule rule-id 8021p 8021p-value dscp dscp-name dscp-value vlan-id vlan-id
The
device is configured to re-mark outgoing packets matching Layer 2
and Layer 3 ACLs.
Run traffic-remark outbound acl name acl-name rule rule-id acl bas-acl adv-acl l2-acl name acl-name rule rule-id 8021p 8021p-value dscp dscp-name dscp-value vlan-id vlan-id
The
device is configured to re-mark outgoing packets matching Layer 2
and Layer 3 ACLs.
Updated: 2020-12-07
Document ID: EDOC1000178021
Views: 85379
Downloads: 19
Average rating:
This Document Applies to these Products
