No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S600-E V200R011C10 NETCONF YANG API Reference

This document describes the NETCONF API functions supported by the switch, including the data model and samples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Data Model

Data Model

The configuration model file matching patch file management is huawei-system-patch.yang.

Table 2-23  Patch file management



Value Range



Indicates the type of an operation on the patch file.

The value is of the enumerated type:
  • startup-config: Configure the patch file for next startup.
  • load: Load the patch file.
  • remove: Delete the patch file.



Indicates the patch file name.

The value is a string of 1 to 64 characters.



Indicates the action taken after the patch file is loaded.

The value is of the enumerated type:
  • running: Run the patch in the current system.


Updated: 2019-10-18

Document ID: EDOC1000178028

Views: 6381

Downloads: 3

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next