No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S600-E V200R011C10 Web-based Configuration Guide

This document describes the configuration and maintenance of device through the web network management system. The web network management system provides the functions of viewing device information and managing the entire system, interfaces, services, ACL, QoS, routes, security, and tools.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Controller Mgmt (Cloud Management Mode)

Controller Mgmt (Cloud Management Mode)

Context

After the switch changes to the cloud management mode, it needs to register with the cloud management platform for authentication. Before registration authentication, the switch needs to obtain IP address or URL information of the cloud management platform to communicate with the platform.

Procedure

  • Configure the Controller's IP address.
    1. Choose Maintenance > System Maintenance > Controller Mgmt to open the Controller Management page.
    2. Set Controller address format to IP, as shown in Figure 7-36.

      Figure 7-36  Configuring the Controller's IP address

    3. Configure an IP address and a port number for the Controller.
    4. Click Apply to complete the configuration.
  • Configure the Controller's URL information.
    1. Choose Maintenance > System Maintenance > Controller Mgmt to open the Controller Management page.
    2. Set Controller address format to URL, as shown in Figure 7-37.

      Figure 7-37  Configuring the Controller's URL information

    3. Configure a URL and a port number for the Controller.
    4. Click Apply to complete the configuration.
Translation
Download
Updated: 2019-03-30

Document ID: EDOC1000178031

Views: 32726

Downloads: 8

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next