No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S600-E V200R011C10 Web-based Configuration Guide

This document describes the configuration and maintenance of device through the web network management system. The web network management system provides the functions of viewing device information and managing the entire system, interfaces, services, ACL, QoS, routes, security, and tools.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Certificate Mgmt (Cloud Management Mode)

Certificate Mgmt (Cloud Management Mode)


In cloud management mode, you can manage local certificates and CA certificates.


  1. Choose Maintenance > System Maintenance > Certificate Mgmt to open the Certificate Mgmt page, as shown in Figure 7-35.

    Figure 7-35  Certificate Mgmt

    Table 7-19 describes parameters on the Certificate Mgmt page.

    Table 7-19  Certificate Mgmt



    Upload and Load CA Certificate

    Load a CA certificate file

    Specifies a CA certificate to be imported. For example, when the switch functions as an SSL agent, it can have an SSL agent CA certificate imported and use the private key of this certificate to sign the SSL client certificate again.

    Upload and Load Local Certificate

    Set an encryption key

    Specifies an encryption password for an RSA key pair file.

    Confirm an encryption key

    Confirms an encryption password for an RSA key pair file.

    Load a local certificate file

    Specifies a local certificate to be imported.

    Current Certificate Information

    Displays Certificate Status, Certificate Version, and Certificate Serial Number of the CA certificate and local certificate.

  2. Click in Load a CA certificate file and select a CA certificate file to be loaded.
  3. Click Load to upload the CA certificate file.
  4. Configure an encryption password, and click in Load a local certificate file to select a local certificate file to be loaded, and click Load.
  5. Check the CA certificate and local certificate in Current Certificate Information.
Updated: 2019-10-18

Document ID: EDOC1000178031

Views: 33990

Downloads: 9

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next