No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S600-E V200R011C10 Web-based Configuration Guide

This document describes the configuration and maintenance of device through the web network management system. The web network management system provides the functions of viewing device information and managing the entire system, interfaces, services, ACL, QoS, routes, security, and tools.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Reboot

Reboot

This section describes how to restart the device and perform related operations during system restart.

Context

After you specify the system software, configuration file, and patch file for next startup, you must restart the device to make the files take effect. The web system provides two restart modes: immediate restart and timed restart. After you restart a device, services will be interrupted; therefore, you need to restart the device when the device is idle. If the device is idle currently, restart the device immediately. If the device is busy processing services, restart the device at a scheduled time when the device is idle.

You are advised to save the current configuration before you restart a device. Otherwise, the configuration may be lost.

The system software and configuration file are for reference only. The actual output information may differ from the preceding information.

Procedure

  1. Choose Maintenance > System Maintenance > Reboot to access the Reboot page, as shown in Figure 7-1.

    Figure 7-1  Reboot

    Table 7-1 describes the parameters on the page.
    Table 7-1  Parameters on the Reboot page

    Item

    Description

    Reboot Record

    Select a slot ID from the Slot ID drop-down list to display its reboot records.

    Reboot Mode

    Indicates a restart mode. The device supports immediate restart and scheduled restart.

    NOTE:

    The time cannot be longer than 720 hours since the current time.

    When a switch is in the cloud management mode, the device does not support scheduled restart.

  2. In the Reboot Mode section, select a restart mode and click Apply. If you select Immediate, a message is displayed, asking whether you want to save the configuration. After you click Save and Reboot, the device restarts immediately and terminates the web connection. If you select Scheduled, enter a specific restart time. The device will restart at the specified time.
Translation
Download
Updated: 2019-03-30

Document ID: EDOC1000178031

Views: 32871

Downloads: 8

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next