No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S600-E V200R011C10 Web-based Configuration Guide

This document describes the configuration and maintenance of device through the web network management system. The web network management system provides the functions of viewing device information and managing the entire system, interfaces, services, ACL, QoS, routes, security, and tools.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Logging In to the Device Through the Web System for the First Time (Switches Changed to the Cloud-based Management Mode)

Logging In to the Device Through the Web System for the First Time (Switches Changed to the Cloud-based Management Mode)

Context

After a device is changed to the cloud-based management mode, you can log in to the device through the Web system for the first time. After logging in to the device, you can easily configure the web login function on the device and then maintain the device in cloud-based management mode on the web page.

Pre-configuration Tasks

Before logging in to a device for the first time through the Web system, complete the following tasks:

  • Power on the device.
  • Ensure that the device has been changed to the cloud-based management mode.

Default Settings

Table 2-5  Default settings of the device
Parameter Default Setting
User name admin
Password admin@huawei.com
User level 15
Login IP address 192.168.1.253

Procedure

  1. Connect the PC to the device.

    If the device works in cloud-based management mode, you need to connect the PC to the management interface of the device.

  2. Enter the initial configuration state.

    Press and hold down the MODE button for 6 seconds or longer. When all indicators are steady green, the device enters the initial configuration state.

    The system sets the admin user level to 15 by default.

  3. Configure an IP address for the PC.

    To ensure that the PC and device have reachable routes to each other, configure an IP address on the same network segment with the device IP address for the PC.

  4. Log in to the device through the Web system.

    Open the browser on the PC and access https://192.168.1.253. On the displayed Web system login page shown in Figure 2-3, enter the default user name admin and default password admin@huawei.com, and select the system language. Click GO or press Enter. The Web system configuration page is displayed.

    Figure 2-3  First login page in the Web system
    NOTE:

    The first login to the device through the Web system requires that the browser on the PC must be Microsoft Edge, Internet Explorer 10.0, Internet Explorer 11.0, Firefox 53.0 to 59.0, or Google Chrome 54.0 to 66.0. If the browser version or browser patch version is not within the preceding ranges, the Web page may be unable to be displayed normally. You need to upgrade the browser and browser patch.

Translation
Download
Updated: 2019-03-30

Document ID: EDOC1000178031

Views: 32757

Downloads: 8

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next