No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S600-E V200R011C10 Web-based Configuration Guide

This document describes the configuration and maintenance of device through the web network management system. The web network management system provides the functions of viewing device information and managing the entire system, interfaces, services, ACL, QoS, routes, security, and tools.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
FAQ About Web System Login

FAQ About Web System Login

How Do I Obtain the Web Page File?

If the system software of the switch contains a web page file that is loaded, you do not need to obtain a web page file again. If the system software does not contain a web page file or you need to upgrade the web page file, log in to Huawei official website to download a separate web page file and upload the web page file to the switch.

To obtain a web page file, log in to the Huawei enterprise support website (, choose the product model and version, and select a patch version under Public Patch in V and R Version to download the required web page file. The file name is in the format of product name-software version number.web page file version number.web.7z.

After downloading the file, compare the downloaded web page file with that on the website to check whether their sizes are the same. If not, an error may occur during file download. Download the file again.

Why Only a Few Options Are Available on the Web System?

The user level of the login web user is low.

Web users of level 2 or lower are monitoring users and can use only the ping and tracert functions. Web users of level 3 or higher are administrators and have all operation rights of a web page.

You can run the local-user user-name privilege level level command in AAA view to set the user level of the login user to level 3 or higher. The login user then has all operation rights of a web page.

How Do I Change the Password for Web Login?

If you forget or want to change the web login password, log in to the switch through the console port, Telnet, or STelnet and set a new password after login.

The Telnet protocol has security vulnerabilities. It is recommended that you log in to the device through the console port or using STelnet V2.

# Set the user name and password to admin123 and Huawei@123 respectively.

<HUAWEI> system-view
[HUAWEI] aaa
[HUAWEI-aaa] local-user admin123 password irreversible-cipher Huawei@123
[HUAWEI-aaa] local-user admin123 service-type http
[HUAWEI-aaa] local-user admin123 privilege level 15
[HUAWEI-aaa] return
<HUAWEI> save

What Is the Difference Between Web and HTTP?

Hypertext Transfer Protocol (HTTP) is used to transfer web page files over the Internet. It runs at the application layer of the TCP/IP protocol stack. The transport layer uses the connection-oriented TCP protocol.

Conclusively, HTTP is a protocol while web is a device management method. Using the web system to manage and maintain devices requires the HTTP protocol.

Updated: 2019-10-18

Document ID: EDOC1000178031

Views: 34176

Downloads: 9

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next