No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S600-E V200R011C10 Web-based Configuration Guide

This document describes the configuration and maintenance of device through the web network management system. The web network management system provides the functions of viewing device information and managing the entire system, interfaces, services, ACL, QoS, routes, security, and tools.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Power status

Power status

The Power status section displays power module presence information and working status, total power of PoE powers, and available PoE power and so on.

Context

For a non-PoE device that provides only internal power modules, the Power status section is not displayed on the Monitor page. If the device does not support PoE power supply, total available PoE power and total PoE output power are not displayed in the Power status section.

Procedure

  1. Click Monitoring to open the Monitoring page, and click on the left of Interface Bandwidth Utilization, Log, Alarm, etc. The Power Status is displayed, as shown in Figure 4-11.

    Figure 4-11  Power Status section

Translation
Download
Updated: 2019-09-23

Document ID: EDOC1000178031

Views: 33687

Downloads: 9

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next