No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S600-E V200R011C10 Web-based Configuration Guide

This document describes the configuration and maintenance of device through the web network management system. The web network management system provides the functions of viewing device information and managing the entire system, interfaces, services, ACL, QoS, routes, security, and tools.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Mirroring

Mirroring

This section describes how to configure mirroring on the switch.

Port Mirroring Display

You can check information about observing ports, inbound mirrored ports, outbound mirrored ports, and bidirectional mirrored ports.

Procedure

  1. Choose Configuration > Advanced Services > Mirroring to open the Mirroring page.
  2. Click the Port Mirroring Display tab to open the Port Mirroring Display page, as shown in Figure 5-82.

    Figure 5-82  Port mirroring display page

  3. Select the Display observing port check box to check an observing port.
  4. Select the Display all mirrored port check box to check all mirrored port.
  5. Select the Display uplink mirrored port check box to check an inbound mirrored port.
  6. Select the Display downlink mirrored port check box to check an outbound mirrored port.
  7. Select the Display bidirectional mirrored port check box to check a bidirectional mirrored port.

Port Mirroring Configuration

You can bind a mirrored port to an observing port.

Procedure

  1. Choose Configuration > Advanced Services > Mirroring to open the Mirroring page.
  2. Click the Port Mirroring Configuration tab to open the Port Mirroring Configuration page,as shown in Figure 5-83.

    Figure 5-83  Port mirroring configuration page

  3. Click Select following Select observing port, Inbound mirrored port, and Outbound mirrored port in sequence to open the Select page, as shown in Figure 5-84.

    Figure 5-84  Select port page

    NOTE:

    If you do not configure ports in the preceding sequence, the selected port is automatically configured as the first port that is not configured. For example, if Outbound mirrored port is configured but Select observing port and Inbound mirrored port are not configured, the selected Outbound mirrored port is automatically configured as Select observing port.

  4. Select the icons of the interfaces to be configured as an observing port, inbound mirrored port, or outbound mirrored port, and click OK.
  5. Click Apply. In the dialog box that is displayed, click OK to complete the configuration.
  6. Click Clear Mirroring Configuration to clear the previous port mirroring configuration.
Translation
Download
Updated: 2019-03-30

Document ID: EDOC1000178031

Views: 32691

Downloads: 8

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next