No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S600-E V200R011C10 Web-based Configuration Guide

This document describes the configuration and maintenance of device through the web network management system. The web network management system provides the functions of viewing device information and managing the entire system, interfaces, services, ACL, QoS, routes, security, and tools.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).


The Alarm section displays five latest alarms, providing the generation time and contents of each alarm.


You can click More to view more alarms.


  1. Click Monitoring to open the Monitoring page, and click on the left of Interface Bandwidth Utilization, Log, Alarm, etc. Alarms are displayed in the Alarm section, as shown in Figure 4-10.

    Figure 4-10  Alarm section

  2. Click More to display the Alarm Management page. You can view latest alarms on this page.
Updated: 2019-03-30

Document ID: EDOC1000178031

Views: 32692

Downloads: 8

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next