No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S600-E V200R011C10 Web-based Configuration Guide

This document describes the configuration and maintenance of device through the web network management system. The web network management system provides the functions of viewing device information and managing the entire system, interfaces, services, ACL, QoS, routes, security, and tools.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
TOP5 Bandwidth Utilization

TOP5 Bandwidth Utilization

This section describes operations you can perform on the TOP5 Bandwidth Utilization.

Procedure

  1. Click Monitoring to open the Monitoring page, and click on the left of Interface Bandwidth Utilization, Log, Alarm, etc. The top 5 interface bandwidth utilization is displayed, as shown in Figure 4-6.

    Figure 4-6  Top 5 Bandwidth Utilization

  2. If you want to view the bandwidth utilization of a specific interface, click the interface below Port Name. The Bandwidth Utilization is displayed. On the page, you can view the real-time bandwidth utilization of this interface, as shown in Figure 4-7.

    Figure 4-7  Bandwidth Utilization

  3. If you want to view the bandwidth utilization of other interfaces, click More in the lower right corner of the Top 5 Bandwidth Utilization. The Port List is displayed. You can view detailed information about other interfaces on the Port List, as shown in Figure 4-8.

    Figure 4-8  Port List

    You can use the following method to search and view detailed information about a specific interface on the Port List.
    1. Select an interface type from the drop-down list.
    2. Enter the interface number in the second search box.
    3. Click .
    On the Port List, you can perform refresh, clear, and clear all operations.
    • Click Refresh to obtain the latest bandwidth utilization.
    • Click Clear to clear the bandwidth utilization of a specified interface and refresh the page.
    • Click Clear All to clear the bandwidth utilization of all interfaces and refresh the page.

    Table 4-1 describes the parameters on the Port List.

    Table 4-1  Port List

    Item

    Description

    Interface Name

    Bandwidth utilization of an interface with a specified type and number.

    Inbound Bandwidth Usage

    Bandwidth utilization of the incoming traffic.

    Outbound Bandwidth Usage

    Bandwidth utilization of the outgoing traffic.

    Inbound Error Packets

    Number of error packets received by an interface.

    Outbound Error Packets

    Number of error packets sent by an interface.

    Inbound Broadcast Packets

    Number of broadcast packets received by an interface.

    Outbound Broadcast Packets

    Number of broadcast packets sent by an interface.

    Operation

    Click Details to obtain the running status of the interface and interface statistics.

Translation
Download
Updated: 2019-03-30

Document ID: EDOC1000178031

Views: 32841

Downloads: 8

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next