No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S600-E V200R011C10 Web-based Configuration Guide

This document describes the configuration and maintenance of device through the web network management system. The web network management system provides the functions of viewing device information and managing the entire system, interfaces, services, ACL, QoS, routes, security, and tools.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Static Routes

Static Routes

This section describes static route configurations.

IPv4 Static Routes

Procedure

  • Check IPv4 static routes.
    1. Click Configuration in the function area. Choose Basic Services > Static Routes > IPv4 Static Routes to open the IPv4 Static Routes page, as shown in Figure 5-36.

      Figure 5-36  IPv4 Static Routes

    2. Set the search criteria.
    3. Click to display all matching records.
  • Add IPv4 static routes.
    1. Click Configuration in the function area. Choose Basic Services > Static Routes > IPv4 Static Routes to open the IPv4 Static Routes page, as shown in Figure 5-36.
    2. Click Add to display IPv4 static route settings, as shown in Figure 5-37.

      Figure 5-37  Adding IPv4 static routes

    3. Set values for Destination IP Address, Destination IP Address Mask, Next Hop Address, and Priority. Click to select Outbound Interface.
    4. Click to complete the configuration.
  • Delete IPv4 static routes.
    1. Click Configuration in the function area. Choose Basic Services > Static Routes > IPv4 Static Routes to open the IPv4 Static Routes page, as shown in Figure 5-36.
    2. Select the IPv4 static route to be deleted and click Delete.
    3. In the dialog box that is displayed, click OK.

IPv6 Static Routes

Procedure

  • Check IPv6 static routes.
    1. Click Configuration in the function area. Choose Basic Services > Static Routes > IPv6 Static Routes to open the IPv6 Static Route page, as shown in Figure 5-38.

      Figure 5-38  IPv6 Static Routes

    2. Set the search criteria.
    3. Click to display all matching records.
  • Add IPv6 static routes.
    1. Click Configuration in the function area. Choose Basic Services > Static Routes > IPv6 Static Routes to open the IPv6 Static Route page, as shown in Figure 5-38.
    2. Click Add to display IPv6 static route settings, as shown in Figure 5-39.

      Figure 5-39  Adding IPv6 static routes

    3. Set values for Destination IPv6 Address, Destination IPv6 Prefix Length, Next Hop Address, and Priority. Click to select Outbound Interface.
    4. Click to complete the configuration.
  • Delete IPv6 static routes.
    1. Click Configuration in the function area. Choose Basic Services > Static Routes > IPv6 Static Routes to open the IPv6 Static Route page, as shown in Figure 5-38.
    2. Select the IPv6 static route to be deleted and click Delete.
    3. In the dialog box that is displayed, click OK.
Translation
Download
Updated: 2019-03-30

Document ID: EDOC1000178031

Views: 32950

Downloads: 8

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next