No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S600-E V200R011C10 Web-based Configuration Guide

This document describes the configuration and maintenance of device through the web network management system. The web network management system provides the functions of viewing device information and managing the entire system, interfaces, services, ACL, QoS, routes, security, and tools.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
User Timeout

User Timeout

The web system assigns each user a timeout period to prevent idle users from occupying system resources.

If you do not perform any operations on the web system GUI for a long time, you are logged out and the login page is displayed. Figure 3-5 shows the login page. If you need to continue operations, log in again.

Figure 3-5  Login page

By default, the timeout period for a login user is 20 minutes. You can change the timeout period on the System Info page.

Changing the Timeout Period

Choose Maintenance > System Maintenance > System and enter the new timeout period on the System info page, as shown in Figure 3-6. Click Apply.

Figure 3-6  Setting system information
Translation
Download
Updated: 2019-03-30

Document ID: EDOC1000178031

Views: 32788

Downloads: 8

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next