No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OSN 7500 II 7500 3500 V200R015C30 Alarms and Performance Events Reference 04

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
About This Document

About This Document

Product Version

The following table lists the product versions applicable to this documentation.

Product Name Version
OptiX OSN 7500 II/7500/3500 V200R015C30
iManager U2000 V200R017C60

Intended Audience

This document describes the OptiX OSN in terms of network application, functions, hardware structure, software architecture, features, and technical specifications.

This document is intended for:

  • Network planning engineers
  • Data configuration engineers
  • System maintenance engineers

Symbol Conventions

The symbols that may be found in this document are defined as follows.

Symbol Description
DANGER Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.
WARNING Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.
NOTICE Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance deterioration, or unanticipated results. NOTICE is used to address practices not related to personal injury.
Provides a tip that may help you solve a problem or save time.
Provides additional information to emphasize or supplement important points in the main text.

GUI Conventions

Convention Meaning
Boldface Buttons, menus, parameters, tabs, window, and dialog titles are in boldface. For example, click OK.
Multi-level menus are in boldface and separated by the ">" signs. For example, choose File > Create > Folder.

Change History

Changes between document issues are cumulative. The latest document issue contains all the changes made in earlier issues.

Updates in Issue 04 (2019-03-08) Based on Product Version V200R015C30

This document is the fourth issue for product version V200R015C30. Compared with Issue 03, this issue incorporates the following updates in V200R015C30:

  • BD_NOT_INSTALLED, DBMS_ERROR, NESTATE_INSTALL, DBMS_PROTECT_MODE, NE_CFG_CONFLICT, DB_RESTORE_FAIL, CFG_DATASAVE_FAIL, CFG_DATACHECK_FAIL: Optimizes the description of impact on the system in "Other Alarm Clearing".
  • BD_NOT_INSTALLED: Optimizes the description of procedure.
  • Optimized the description of M_S_SW.
  • Optimized the parameter description of TR_LOC and NO_ELABEL.

Updates in Issue 03 (2018-01-30) Based on Product Version V200R015C30

This document is the third issue for product version V200R015C30. Compared with Issue 02, this issue incorporates the following updates in V200R015C30:

  • Added the following alarms to "Alarm List" and "Other Alarm Clearing": PING_LOS, PING_ARP_MISMATCH.
  • DCN_CHANNEL_BITERROR added parameter, possible Causes, and procedure.

Updates in Issue 02 (2017-10-30) Based on Product Version V200R015C30

This document is the second issue for product version V200R015C30. Compared with Issue 01, this issue incorporates the following updates in V200R015C30:

  • Added the following alarms to "Alarm List" and "Other Alarm Clearing": DCN_CHANNEL_BITERROR, PATCH_MATCH_NO_START, ERPS_BLOCK, ERPS_NOT_COMPLETE, LPT_AUTH_FAIL, and SRV_LOOP_LD.
  • Optimized the following alarms: DBMS_ERROR.
  • Optimized the 1588v2 performance events.

Updates in Issue 01 (2017-04-30) Based on Product Version V200R015C30

This document is the first issue for product version V200R015C30. Compared with the latest issue for product version V200R015C20, this issue incorporates the following updates in V200R015C30:

  • Added the following alarms to "Alarm List" and "Other Alarm Clearing": COM_EXTECC_FULL, DCNLINK_OVER, NEIP_CONFUSION, PATCH_INIT_FAIL, and PATCH_OP_TIMEOUT.
  • Optimized the following alarms: APS_MANUAL_STOP and POWER_FAIL.
Translation
Download
Updated: 2019-04-15

Document ID: EDOC1000178036

Views: 33502

Downloads: 177

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next