No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S12700 V200R011C10 Configuration Guide - Network Management and Monitoring

This document provides the configurations of network management and monitoring features supported by the product, including SNMP, RMON and RMON2, LLDP, Performance Management, iPCA, NQA, Service Diagnosis, Mirroring, Packet Capture, Traffic Distribution, NetStream, sFlow, and TWAMP Light.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
MTrace Test

MTrace Test

The NQA Multicast Trace (MTrace) test detects the multicast forwarding path from a multicast source to a destination host and collects statistics about each device along the multicast forwarding path.

The MTrace test process is as follows:

  1. The multicast querier (NQA client) sends an IGMP Tracert query packet to the last-hop switch connected to the destination host.

  2. After receiving the IGMP Tracert query packet, the first-hop switch connected to the destination host sends an IGMP Tracert request packet to the first-hop switch.

  3. After receiving the IGMP Tracert request packet, the first-hop switch sends an IGMP Tracert response packet to the NQA client.

    From this packet, it obtains the multicast forwarding path from the multicast source to the destination host as well as information about each switch along the path.

Figure 6-15  Network for MTrace test

MTrace test results and historical records are collected in test instances. You can run commands to view the test results and historical records.

Updated: 2019-10-21

Document ID: EDOC1000178113

Views: 138123

Downloads: 53

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next