No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R011C10 Configuration Guide - Network Management and Monitoring

This document provides the configurations of network management and monitoring features supported by the product, including SNMP, RMON and RMON2, LLDP, Performance Management, iPCA, NQA, Service Diagnosis, Mirroring, Packet Capture, Traffic Distribution, NetStream, sFlow, and TWAMP Light.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Parameters for Connecting to an FTP Server

Configuring Parameters for Connecting to an FTP Server

Context

Before connecting to an FTP server, specify the FTP server address used to receive NQA test results, configure a user name and password used for logging in to the FTP server, and the name of file used to save NQA test results.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Use either of the following methods to configure the IP address of the FTP server:

    • On an IP network, run the nqa-ftp-record ip-address ip-address command to configure the IP address of the FTP server.
    • On a VPN network, run the nqa-ftp-record vpn-instance vpn-instance command to configure the VPN instance name of the FTP server.

  3. (Optional) Run nqa-ftp-record source-address ip-address

    The FTP client address is configured.

  4. Run nqa-ftp-record username username

    The user name used for logging in to the FTP server is configured. The user name is used when test results are saved on the FTP server.

  5. Run nqa-ftp-record password { password | cipher cipher-password }

    The password used for logging in to the FTP server is configured. The password is used when test results are saved on the FTP server.

  6. Run nqa-ftp-record filename filename

    The name of the file used to save NQA test results is configured.

Translation
Download
Updated: 2019-10-21

Document ID: EDOC1000178113

Views: 149112

Downloads: 56

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next