No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R011C10 Configuration Guide - Network Management and Monitoring

This document provides the configurations of network management and monitoring features supported by the product, including SNMP, RMON and RMON2, LLDP, Performance Management, iPCA, NQA, Service Diagnosis, Mirroring, Packet Capture, Traffic Distribution, NetStream, sFlow, and TWAMP Light.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Configuring Upload Reliability for a Bulk File

(Optional) Configuring Upload Reliability for a Bulk File

Context

To ensure reliable file uploading, the system provides a retransmission mechanism. When a file upload fails, the system retransmits the file for the specified number of times. If the file still fails to be uploaded, the system discards statistics data in the file. When the network quality is low, run the transfer remain-time command to increase the upload holding time to improve reliability of file uploading.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run bulk-file file-name

    A bulk file is created and the bulk file view is displayed.

  3. Run transfer retry retry-times

    The maximum number of retransmissions is set for the bulk file.

    By default, the maximum number of retransmissions for a bulk file is 5.

  4. Run transfer remain-time remain-time

    The upload holding time is set for the bulk file.

    By default, the upload holding time is 5 minutes.

    To ensure that only one copy of a bulk file is uploaded to the server, set remain-time to be smaller than or equal to the file upload interval.

Translation
Download
Updated: 2019-10-21

Document ID: EDOC1000178113

Views: 135191

Downloads: 53

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next