No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S12700 V200R011C10 Configuration Guide - Network Management and Monitoring

This document provides the configurations of network management and monitoring features supported by the product, including SNMP, RMON and RMON2, LLDP, Performance Management, iPCA, NQA, Service Diagnosis, Mirroring, Packet Capture, Traffic Distribution, NetStream, sFlow, and TWAMP Light.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).


The NQA Simple Network Management (SNMP) test is performed using UDP. It measures the time taken for communication between an NQA client and an SNMP agent.

The SNMP test process is as follows:

  1. The source (SwitchA) sends a request packet to the SNMP agent (SwitchC) to obtain the system time.

  2. Upon receiving the request packet, the SNMP agent queries the system time, constructs a reply packet, and sends it to the source.

  3. The source receives the reply packet and calculates the time taken for communication between the source and the SNMP agent.
Figure 6-6  Network for SNMP test

SNMP test results and historical records are collected in test instances. You can run commands to view the test results and historical records.

Updated: 2019-10-21

Document ID: EDOC1000178113

Views: 149113

Downloads: 56

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next