No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R011C10 Configuration Guide - Network Management and Monitoring

This document provides the configurations of network management and monitoring features supported by the product, including SNMP, RMON and RMON2, LLDP, Performance Management, iPCA, NQA, Service Diagnosis, Mirroring, Packet Capture, Traffic Distribution, NetStream, sFlow, and TWAMP Light.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
NetStream Packet Sampling

NetStream Packet Sampling

Packet sampling takes samples of incoming and outgoing traffic in adjustable intervals so that only the statistics of sampled packets are collected. This reduces the impact of NetStream on device performance and the statistics show the flow status of the entire network.

The switch supports packet-based regular sampling. In this mode, one packet is sampled out of a fixed number of packets. For example, if the number of packets is set to 100 and packet sampling starts from the 5th packet, the 105th packet is sampled and so on. This mode is applicable to accounting based on traffic volume.

Translation
Download
Updated: 2019-10-21

Document ID: EDOC1000178113

Views: 149902

Downloads: 56

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next