No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S12700 V200R011C10 Configuration Guide - Network Management and Monitoring

This document provides the configurations of network management and monitoring features supported by the product, including SNMP, RMON and RMON2, LLDP, Performance Management, iPCA, NQA, Service Diagnosis, Mirroring, Packet Capture, Traffic Distribution, NetStream, sFlow, and TWAMP Light.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring the NQA Client to Send Test Results to an FTP Server

Configuring the NQA Client to Send Test Results to an FTP Server


If you want to save NQA test results, configure the NQA client to send test results to an FTP server.

By default, the system saves the latest five test results. When new test results are generated, the new ones overwrite the earliest ones. If the NMS does not obtain the test results in a timely manner, test results will be lost. You can configure the NQA client to send the test results to the FTP server when the number of test results saved on the local device reaches the maximum value. This prevents the loss of test results and allows network administrators to analyze the test results obtained at different time.

Pre-configuration Tasks

Before configuring the NQA client to send test results to an FTP server, complete the following tasks:

  • Configure the FTP server.
  • Configure reachable routes between the NQA client and the NMS.
  • Configure a test instance.

It is recommended that you use the FTP protocol in the secure network environment.

Perform the following configurations on the NQA client:

Updated: 2019-10-21

Document ID: EDOC1000178113

Views: 149114

Downloads: 56

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next