No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S12700 V200R011C10 Configuration Guide - Network Management and Monitoring

This document provides the configurations of network management and monitoring features supported by the product, including SNMP, RMON and RMON2, LLDP, Performance Management, iPCA, NQA, Service Diagnosis, Mirroring, Packet Capture, Traffic Distribution, NetStream, sFlow, and TWAMP Light.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Displaying the Outbound Interface of Specified Packets

Displaying the Outbound Interface of Specified Packets


By checking the outbound interface of the packets that contain the specified attributes, you can find out the packet analysis server to which the packets are distributed, and then view the detailed analysis results on the corresponding server.


  • Run the display out-interface sip source-ip-address dip destination-ip-address [ sport source-port dport destination-port [ protocol { protocol-number | gre | icmp | igmp | ip | ipinip | ospf | tcp | udp } ] ] command to check the outbound interface of the packets that contain the specified attributes.
Updated: 2019-10-21

Document ID: EDOC1000178113

Views: 141206

Downloads: 55

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next