No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R011C10 Configuration Guide - Network Management and Monitoring

This document provides the configurations of network management and monitoring features supported by the product, including SNMP, RMON and RMON2, LLDP, Performance Management, iPCA, NQA, Service Diagnosis, Mirroring, Packet Capture, Traffic Distribution, NetStream, sFlow, and TWAMP Light.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring a Flexible Flow Statistics Template

Configuring a Flexible Flow Statistics Template

Context

You need to configure a flexible flow statistics template before applying it to an interface. To obtain more detailed flow statistics, you can configure whether flexible flow statistics contain the number of packets and bytes, and the indexes of the inbound and outbound interfaces.

Procedure

  1. Run the system-view command to enter the system view.
  2. Run the ip netstream record record-name command to create flexible flow statistics template and enter the flexible flow statistics template view.
  3. Run the match ip { protocol | dscp | source-address | destination-address | source-port | destination-port | flow-label } command to configure the aggregation keywords for the flexible flow statistics template.
  4. Run the collect counter { bytes | packets } command to add the number of packets and bytes to the flexible flow statistics exported to the NSC.

    By default, the flexible flow statistics that are exported to the NSC do not contain the number of packets or bytes.

  5. (Optional) Run the collect interface { input | output } command to add the indexes of the inbound and outbound interfaces to the flexible flow statistics exported to the NSC.

    By default, the flexible flow statistics exported to the NSC do not contain the index of the inbound or outbound interface.

Translation
Download
Updated: 2019-10-21

Document ID: EDOC1000178113

Views: 141556

Downloads: 55

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next