No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S12700 V200R011C10 Configuration Guide - Network Management and Monitoring

This document provides the configurations of network management and monitoring features supported by the product, including SNMP, RMON and RMON2, LLDP, Performance Management, iPCA, NQA, Service Diagnosis, Mirroring, Packet Capture, Traffic Distribution, NetStream, sFlow, and TWAMP Light.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Licensing Requirements and Limitations for NetStream

Licensing Requirements and Limitations for NetStream

Involved Network Elements

The switch needs to work with a NetStream server, for example, a server with Huawei eSight network management software installed.

Licensing Requirements

NetStream is a basic feature of a switch and is not under license control.

Version Requirements

Table 11-3  Products and versions supporting NetStream


Product Model

Software Version


S12708, S12712

V200R005C00, V200R006C00, V200R007C00, V200R007C20, V200R008C00, V200R009C00, V200R010C00, V200R011C10


V200R010C00, V200R011C10


V200R008C00, V200R009C00, V200R010C00, V200R011C10

To know details about software mappings, see Hardware Query Tool.

Feature Limitations

  • NetStream is only supported by E series cards (except ET1D2X48SEC0) and X series cards.

  • The NetStream and IP Source Trail functions conflict with each other. If the IP Source Trail function has been configured on a device, the NetStream function cannot be configured. To enable the IP Source Trail function, you must disable the NetStream function first. To enable the NetStream function, you must disable the IP Source Trail function first. For the configuration of IP Source Trail, see Configuring IP Source Trail in "IPSG Configuration" in the Configuration Guide - Security of the corresponding version.
  • Only V9 supports the NetStream interface index mapping function.
  • When you configure the function of collecting outgoing NetStream flow statistics on an interface of switch, if the version number of exported packets is V5, the switch can only be managed by Huawei's NMS.
Updated: 2019-10-21

Document ID: EDOC1000178113

Views: 150085

Downloads: 56

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next