No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R011C10 Configuration Guide - Network Management and Monitoring

This document provides the configurations of network management and monitoring features supported by the product, including SNMP, RMON and RMON2, LLDP, Performance Management, iPCA, NQA, Service Diagnosis, Mirroring, Packet Capture, Traffic Distribution, NetStream, sFlow, and TWAMP Light.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Exporting of IPv6 Original Flow Statistics

Configuring Exporting of IPv6 Original Flow Statistics

Pre-configuration Tasks

After IPv6 original flow statistics exporting is configured, the NDE collects statistics about IPv6 flows and exports the statistics about each flow to the NetStream server for further analysis.

Before configuring IPv6 original flow statistics exporting, complete the following tasks:

  • Set physical parameters of interfaces.
  • Set the link-layer attributes of each interface.

Configuration Procedure

The configuration tasks of IPv6 original flows can be performed in any sequence.

Translation
Download
Updated: 2019-10-21

Document ID: EDOC1000178113

Views: 137229

Downloads: 53

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next