No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R011C10 Configuration Guide - Network Management and Monitoring

This document provides the configurations of network management and monitoring features supported by the product, including SNMP, RMON and RMON2, LLDP, Performance Management, iPCA, NQA, Service Diagnosis, Mirroring, Packet Capture, Traffic Distribution, NetStream, sFlow, and TWAMP Light.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Overview of LLDP

Overview of LLDP

Definition

The Link Layer Discovery Protocol (LLDP) is a standard Layer 2 topology discovery protocol defined in IEEE 802.1ab. LLDP allows a device to send local management information such as management IP address, device ID, and port ID to neighbors. Neighbors save the received information in their management information bases (MIBs). The network management system (NMS) can search required information in MIBs to determine link status.

Purpose

An NMS must be capable of managing network devices of different types with complex configurations. Most NMSs can detect Layer 3 network topologies, but cannot detect detailed Layer 2 topologies or detection conflicts in configurations. A vendor-neutral protocol is required to exchange Layer 2 information between network devices.

LLDP provides a standard link-layer discovery method. Layer 2 information obtained through LLDP allows the NMS to detect the topology of neighboring devices, and display paths between clients, switches, routers, application servers, and network servers. The NMS can also detect conflicts in configurations between network devices and identify causes of network connection failures. With an NMS, enterprise users can monitor the link status on devices running LLDP and quickly locate network faults.

Translation
Download
Updated: 2019-10-21

Document ID: EDOC1000178113

Views: 134736

Downloads: 53

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next