No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R011C10 Configuration Guide - Network Management and Monitoring

This document provides the configurations of network management and monitoring features supported by the product, including SNMP, RMON and RMON2, LLDP, Performance Management, iPCA, NQA, Service Diagnosis, Mirroring, Packet Capture, Traffic Distribution, NetStream, sFlow, and TWAMP Light.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Licensing Requirements and Limitations for Service Diagnosis

Licensing Requirements and Limitations for Service Diagnosis

Involved Network Elements

Other network elements are not required.

Licensing Requirements

Service diagnosis is a basic feature of a switch and is not under license control.

Version Requirements

Table 7-2  Products and versions supporting service diagnosis

Product

Product Model

Software Version

S12700

S12708, S12712

V200R005C00, V200R006C00, V200R007C00, V200R007C20, V200R008C00, V200R009C00, V200R010C00, V200R011C10

S12710

V200R010C00, V200R011C10

S12704

V200R008C00, V200R009C00, V200R010C00, V200R011C10

NOTE:
To know details about software mappings, see Hardware Query Tool.

Feature Limitations

  • Service diagnosis affects system performance. Therefore, enable service diagnosis only when fault locating is required. After locating faults, immediately run the undo trace enable command to disable service diagnosis.
  • Users with different services have different attributes. Create diagnosis objects for different services based on different attributes.
    • DHCP service: based on the MAC address.
    • AAA and NAC services: based on the MAC address, IP address, user name, user VLAN ID, access mode, or interface number.
Translation
Download
Updated: 2019-10-21

Document ID: EDOC1000178113

Views: 142873

Downloads: 55

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next