No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R011C10 Configuration Guide - Network Management and Monitoring

This document provides the configurations of network management and monitoring features supported by the product, including SNMP, RMON and RMON2, LLDP, Performance Management, iPCA, NQA, Service Diagnosis, Mirroring, Packet Capture, Traffic Distribution, NetStream, sFlow, and TWAMP Light.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Enabling NetStream Original Flow Statistics Collection on an Interface

Enabling NetStream Original Flow Statistics Collection on an Interface

Context

IPv6 original flow statistics can be exported only when you have enabled flow statistics collection on an interface.

Procedure

  1. Run the system-view command to enter the system view.
  2. Run the interface interface-type interface-number command to enter the interface view.
  3. Run the ipv6 netstream { inbound | outbound } command to enable the NetStream function on the interface to collect statistics about IPv6 flows.

    By default, the NetStream function for IPv6 flows is disabled on the interface.

Translation
Download
Updated: 2019-10-21

Document ID: EDOC1000178113

Views: 138150

Downloads: 53

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next