No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R011C10 Configuration Guide - Network Management and Monitoring

This document provides the configurations of network management and monitoring features supported by the product, including SNMP, RMON and RMON2, LLDP, Performance Management, iPCA, NQA, Service Diagnosis, Mirroring, Packet Capture, Traffic Distribution, NetStream, sFlow, and TWAMP Light.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Basic Functions for Bulk Statistics Collection

Configuring Basic Functions for Bulk Statistics Collection

Context

An NMS sends SNMP request messages one by one in polling mode to obtain information from a device, and the device sends response messages one by one. As a result, a large number of messages are exchanged between the NMS and device. These messages consume high bandwidth and many system resources on the device. The bulk statistics collection function of the switch enables the NMS to obtain device information more efficiently. This function uses MIB interfaces to obtain device information, as defined in SNMP.

To enable the NMS to monitor an object on a device, associate the SNMP agent with the corresponding MIB object on the device. Then the device uses the MIB interface to periodically collect statistics about the specified object. The statistics collection interval can be set to 5 minutes, 10 minutes, 15 minutes, or 30 minutes. The default statistics collection interval is 5 minutes. After collecting statistics about the object within the collection interval, the device compresses the collected data and sends the data to the NMS through FTP or TFTP.

Statistics objects can be added to the device dynamically. You can configure new statistics objects when the device is collecting statistics about an object. The device starts to collect statistics about another object when it finishes collecting statistics about the current object.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run bulk-stat enable

    The bulk statistics collection function is enabled.

  3. Run bulk-file file-name

    A bulk file is created and the bulk file view is displayed.

  4. Run object oid class { single | column [ start-index start-index ] [ instance-number instance-number ] }

    A statistic object is added to the bulk file.

  5. (Optional) Run collect interval interval

    The statistics collection interval is set for the bulk file.

    By default, the statistics collection interval is 5 minutes.

  6. (Optional) Run transfer interval interval

    The upload interval of the statistics is set for the bulk file.

    By default, the upload interval is 5 minutes.

  7. Run transfer { primary | secondary } protocol { tftp | { { ftp | sftp } username user-name password password } } { host host-name } [ path destination-path ]

    The upload mode and URL are set for the bulk file.

  8. Run collect enable

    The bulk file is enabled.

Translation
Download
Updated: 2019-10-21

Document ID: EDOC1000178113

Views: 142392

Downloads: 55

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next