No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R011C10 Configuration Guide - Network Management and Monitoring

This document provides the configurations of network management and monitoring features supported by the product, including SNMP, RMON and RMON2, LLDP, Performance Management, iPCA, NQA, Service Diagnosis, Mirroring, Packet Capture, Traffic Distribution, NetStream, sFlow, and TWAMP Light.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Configuring File Parameters for Saving Test Results Through FTP

(Optional) Configuring File Parameters for Saving Test Results Through FTP

Context

NQA test results can be sent to the specified FTP server and saved in text files. The system will generate a new text file with a continuous sequence number to save the subsequent test results: when either of the following parameters exceeds the specified value:
  • Number of test results saved in the file on the FTP server
  • Time period for saving test results to the file on the FTP server

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run nqa-ftp-record item-num item-number

    The number of test results saved to the file on the FTP server is configured.

    By default, up to 100000 NQA test results can be stored in a file.

  3. Run nqa-ftp-record time time

    The time period for saving test results to the file on the FTP server is configured.

    By default, the time period is 60 minutes.

  4. (Optional) Run nqa upload statistics datetime-type { utc | local }

    The type of the time based on which FTP test results are saved to a file through FTP is configured.

    UTC is the default time type based on which NQA test results are uploaded to the server. This time type causes difficulties in time understanding. Therefore, changing the time type to local is recommended.

Translation
Download
Updated: 2019-10-21

Document ID: EDOC1000178113

Views: 135869

Downloads: 53

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next