Configuring the One-Way Transmission Delay Threshold
Context
In UDP jitter tests and ICMP jitter tests, after the one-way transmission delay threshold is configured, the test results show statistics about the test packets of which the transmission exceeds the threshold. Network administrators can analyze the operating status of the network according to the test results. You can perform either of Step 3 and Step 4 or both of them in any sequence.
Procedure
- Run system-view
The system view is displayed.
- Run nqa test-instance admin-name test-name
The NQA view is displayed.
- Run threshold owd-sd owd-sd-value
The one-way transmission delay threshold (from the source to the destination) is configured.
By default, no one-way transmission delay threshold is configured.
- Run threshold owd-ds owd-ds-value
The one-way transmission delay threshold (from the destination to the source) is configured.
By default, no one-way transmission threshold is configured.
Previous
