No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R011C10 Configuration Guide - Network Management and Monitoring

This document provides the configurations of network management and monitoring features supported by the product, including SNMP, RMON and RMON2, LLDP, Performance Management, iPCA, NQA, Service Diagnosis, Mirroring, Packet Capture, Traffic Distribution, NetStream, sFlow, and TWAMP Light.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the Configuration

Verifying the Configuration

Prerequisites

All the configurations are completed for detecting the network of a telepresence video conference.

Procedure

  • Run the display nqa application command on the NQA client to check the type of the NQA test instance corresponding to the service.
  • Run the display nqa-parameter command on the NQA client in the NQA test instance view to check the configuration parameters of the current NQA test instance.
  • Run the display nqa results [ collection | success | failed ] [ test-instance admin-name test-name ] command to check the result of the NQA test instance.
Translation
Download
Updated: 2019-10-21

Document ID: EDOC1000178113

Views: 137460

Downloads: 53

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next