No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S12700 V200R011C10 Configuration Guide - User Access and Authentication

This document describes the working mechanisms, configuration procedures, and configuration examples of User Access and Authentication features, such as AAA, DAA, NAC, PPPoE, Policy Association, and IP session.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
How Are Dumb Terminals such as Printers Authenticated in an 802.1X Network?

How Are Dumb Terminals such as Printers Authenticated in an 802.1X Network?

Enable MAC address bypass authentication.

You can enable MAC address bypass authentication for terminals (such as printers) on which the 802.1X client software cannot be installed or used. After MAC address bypass authentication is configured on the interface, the device performs 802.1X authentication and starts the delay timer for MAC address bypass authentication. If 802.1X authentication still fails after the delay of MAC address bypass authentication, the device performs MAC address authentication.

Updated: 2019-10-21

Document ID: EDOC1000178117

Views: 118409

Downloads: 55

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next