No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S12700 V200R011C10 Configuration Guide - User Access and Authentication

This document describes the working mechanisms, configuration procedures, and configuration examples of User Access and Authentication features, such as AAA, DAA, NAC, PPPoE, Policy Association, and IP session.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Terminating PPPoE Sessions

Terminating PPPoE Sessions


When you perform some operations, for example, AAA-related operations, no online user is allowed on the device. You can manually terminate PPPoE sessions on the device.

User services are interrupted when PPPoE sessions are terminated; therefore, exercise caution when performing this operation.


  1. Run the display access-user command to view online user information.

    In the command output, check and record the ID of user whose PPPoE session needs to be terminated.

  2. Run the system-view command to display the system view.
  3. Run the aaa command to enter the AAA view.
  4. Run the cut access-user user-id begin-number [ end-number ] command to terminate a PPPoE session.

    The user ID specified in this command is the same as that recorded in step 1.

Updated: 2019-10-21

Document ID: EDOC1000178117

Views: 131899

Downloads: 64

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next