No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R011C10 Configuration Guide - User Access and Authentication

This document describes the working mechanisms, configuration procedures, and configuration examples of User Access and Authentication features, such as AAA, DAA, NAC, PPPoE, Policy Association, and IP session.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Forcing Users to Go Offline

Forcing Users to Go Offline

Context

You can force online users to go offline by specifying the domain name or interface. This function is applicable to situations such as when the online users are unauthorized, the number of online users reaches the maximum, or the AAA configurations are modified. For example, when you modify the AAA configurations of online users, the new AAA configurations take effect on these users only after you force them to go offline.

NOTE:
  • If you delete the AAA configuration of online users, the users may be forced to go offline.

Procedure

  • Run the cut access-user { domain domain-name | interface interface-type interface-number [ vlan vlan-id [ qinq qinq-vlan-id ] ] | ip-address ip-address [ vpn-instance vpn-instance-name ] | mac-address mac-address | access-slot slot-id | user-id begin-number [ end-number ] | username user-name } or cut access-user access-type { admin [ ftp | ssh | telnet | terminal | web ] | ppp } [ username user-name ] command in the AAA view to disconnect one or more sessions. After a session of a user is disconnected, the user is forced to go offline.
  • Run the cut access-user ssid ssid-name command in the AAA view to disconnect one or more sessions based on SSIDs. After a session of a user is disconnected, the user is forced to go offline.
  • Run the cut access-user ucl-group { group-index | name group-name } command in the AAA view to force UCL group users offline.
  • Run the cut access-user work-group { work-group-id | default } command in the AAA view to disconnect online users based on WLAN work groups.
Translation
Download
Updated: 2019-10-21

Document ID: EDOC1000178117

Views: 123002

Downloads: 58

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next