No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R011C10 Configuration Guide - User Access and Authentication

This document describes the working mechanisms, configuration procedures, and configuration examples of User Access and Authentication features, such as AAA, DAA, NAC, PPPoE, Policy Association, and IP session.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Why Can a Level-1 User Use Configuration-Level Commands?

Why Can a Level-1 User Use Configuration-Level Commands?

Level-1 users can use only the commands at levels 1 and 0, but not commands at level 2 (configuration-level commands). The user level can be set in the AAA view, service scheme view, or user interface view. The user level set in the AAA view has the highest priority, and that set in the user interface view has the lowest priority. Therefore, user level 1 set in the user interface view does not take effect when a higher user level has been set in the AAA or service scheme view. The following commands can be used to set the user level in different views:

  • Run the local-user user-name privilege level level command in the AAA view to set the user level for user user-name.

  • Run the admin-user privilege level level command in the service scheme view to set the user level for all users in a domain.
  • Run the user privilege level level command in the user interface view to set the user level for all users logging in through the user interface.

    By default, console login users are at level 15, and users logging in through the VTY user interface are at level 0.

Translation
Download
Updated: 2019-10-21

Document ID: EDOC1000178117

Views: 118185

Downloads: 55

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next